AquataFlex 506 is a 1A:1B by volume, "Bio-based", 100% solids, zero V.O.C. "novolac epoxy/polyurea" hybrid coating designed for use in applications that require the increased chemical resistance of an epoxy and the speed of cure that a polyurea provides. AquataFlex 506 is surface tolerant and is hydrophobic to provide excellent waterproofing properties and adhesion. AquataFlex 506 adheres well to properly prepared concrete, steel, aluminum, wood, composites and many other substrates. Contact Raven for primer recommendations for various substrates. It is NSF/ANSI 61 certified for potable water in tanks and pipes. Typical uses include: Concrete or Steel Water/Waste Water Lining General Maintenance Coating in Immersion Conditions Potable Water Tanks, Reservoirs, Basins and Pipes Concrete Waterproofing U.S.D.A. - FSIS Acceptable (food grade) PHYSICAL PROPERTIES (Typical): Description Method Result Tensile Strength ASTM D412/ 638 2,080 psi Elongation ASTM D412/ 638 41.4% NSF/ANSI 61 Potable Water Certification ANSI 61 Certified for tanks and pipe Adhesion to Steel ASTM D4541 >1750 psi Die "C" Tear ASTM D624 175 pli Water Absorption ASTM 570 0.25% Shrinkage Internal Test 0.1% Hardness, Shore A ASTM D2240 97 Hardness, Shore D ASTM 2240 60 Viscosity A-side (75oF) Brookfield 100-200 Viscosity B-side (75oF) Brookfield 1700-2200 Recommended PH Range Application not to exceed 0 to 14 Moisture Vapor Tran. ASTM D1653 19 Grams/m2 Processing Properties: Units Result Gel Time Minutes 5-8 Tack Free Time Minutes 30-60 Recoat Time (Minimum) Minutes @ 72° F Immediate Recoat Time (Maximum w/o Prep. Hours @ 72° F 24 hrs Designed for use in immersion, indoor/outdoor, or atmospheric exposure as a tough, flexible, impact resistant, waterproof coating and lining system. Ideally suited for use in areas including: Water & Wastewater Linings Manhole & Sewer Linings Pipelines Secondary Containment Slurry Lines Potable Water Tanks Tunnels Fuel Storage & Containment Fast cure – fast return to service No VOCs and extremely low odor Seamless, flexible and waterproof Impact, tear, and abrasion resistant Chemical resistant Highly impermeable.
|Biopreferred® Federal Purchasing|
|% Biobased Content|
The information contained in this site was provided by the producer and/or certifier and we endeavor to keep the information up to date and correct. ecomedes make no representations or warranties of any kind, express or implied, about the completeness or availability of the product information on the site for any purpose. We encourage users to contact the producer or certifier directly for additional details. It’s important to note that no products individually or collectively, can guarantee a specific number of points for LEED, WELL, GreenGlobes or LBC certifications.
What's next? Add this product to a project and produce Federal Guidelines or LEED documentation.